| Click on the images for a larger view |
| MILD STEEL |
 |
 |
At PRECISION ENGINEERS, we have the capacity to turn any parts up to 50.8 mm diameter out of 4 metres long bars.
The part shown at left is manufactured from a 47.6 mm diameter bar.
We are able to continuously manufacture without any manual input., thus giving us
the opportunity to offer keen competitive prices. |
| MILD STEEL |
|
 |
When parts exceed 50.8 mm in diameter we then cut the parts on our automatic
bandsaw to the required width.
Our current capacity is to a 200 mm chuck size.
The hub on the left is manufactured from a 80.0 mm diameter bar. The keyway of
the centre hole is cut in our machining centre, and the four holes are drilled and
tapped in our machining centre as well. |
| MILD STEEL |
|
 |
The particular part shown at left is produced from a 60.0 mm hexagonal bar cut to
lengths of 300 mm long. It is cut on our automatic bandsaw. With the assistance of a
life centre, the turning presents no problems. |
| STAINLESS STEEL |
|
 |
The part shown here is manufactured from a 65 mm by 6 mm flat bar 3.6 metres
long, cut to length in our automatic bandsaw.
The centre hole is turned in our 200 mm capacity chuck lathe, and the four comer
holes are drilled and tapped automatically in our machining centre. |
|
 |
|
